COORDINATE MEASURING MACHINE MITUTOYO Crysta-Plus M776/ 7106

COORDINATE MEASURING MACHINE MITUTOYO Crysta-Plus M776/ 7106. he Crysta-Plus M has been developed by Mitutoyo in its quest for low-cost, easy-to-use coordinate measuring machines without compromising measuring accuracy. Designed for high-accuracy The Crysta-Plus M offers the highest measuring accuracy of E= ( 3.5+ 4.5L/ 1000) ¼ m in this class. The Y-axis guide rail, which is a one-piece design with the granite plate, shows very little deterioration even over a long period of time, and thus promises to maintain stable accuracy for a long time. The high precision air bearings are employed on all axial guideways. Its smooth sliding results in fatigue-free 3-D measurements. Probe illumination ( optional) The white LED probe illumination unit can be installed at the rear of the probe adapter to illuminate the area around the tip of the stylus.This is very useful for the deep hole measurement. Constant measurement The probe adapter with a constant grip is attached to the bottom of the Z-axis spindle to minimize a personal error in measurement. During measurement, this grip can reduce the influence of the fine swinging of the hand and improve a repeatability in measurement. * ISO 10360-2; 1994 E: Error of indication of volumetric length measurement L: Measuring length ( mm) R: Probing error * * The distance between the bottom face of the Z spindle and the table top * * * 0.5MPa to 0.9MPa at the air source * * * * 100 liters per minute ( in normal state) at the air source Specification Model Crysta-Plus M776* Crysta-Plus M7106 Range X-axis 27.56" ( 700mm) 27.56" ( 700mm) Y-axis 27.56" ( 700mm) 39.37" ( 1000mm) Z-axis 23.62" ( 600mm) 23.62" ( 600mm) Length standard Reflective linear encoder Resolution .00002" ( 0.0005mm) Accuracy ( 20° C) ISO 10360-2; 1994 E = ( 4.5+ 4.5L/ 1000) ¼ m R = 5.0¼ m ( when using TP20) Guide method Air bearing for each axis Clamping method Quick air clamp for each axis Measuring Table Material Granite Working Area 34.65" x 59.91" ( 880 x 1420mm) 34.65" x 67.72" ( 880 x 1720mm) Tapped Insert M8x1.25 ( for clamping workpiece) Maximum workpiece height* * 31.50" ( 800mm) Maximum workpiece weight 1100 lbs. ( 500kg) 1760 lbs. ( 800kg) Air pressure 0.4MPa ( 4kgf/ cm2) * * * or 58 PSI Air consumption 50 liters per minute ( in normal state) * * * * or 1.80 CFM Dimensions Width 57.87" ( 1470mm) 57.87" ( 1470mm) Depth 64.96" ( 1650mm) 76.77" ( 1950mm) Height 111.41" ( 2830mm) 111.41" ( 2830mm) Mass ( including the machine stand) 3058 lbs. ( 1390kg) 3586 lbs. ( 1630kg) * Model M766 is a “ special order”